Uso de Nanomateriales en la Producción del Concreto: Revisión Literaria

##plugins.themes.bootstrap3.article.main##

Socrates Pedro Muñoz Pérez
https://orcid.org/0000-0003-3182-8735
Yomira Marisol Tuse Vargas
https://orcid.org/0000-0002-2400-3703
Kevin Jordan Guerrero Santisteban
https://orcid.org/0000-0002-0511-5523
Yerson Antony Vázquez Pérez
https://orcid.org/0000-0001-6001-1009

Resumo

La tecnología de nanomateriales que se está implementando en el sector construcción, han generadoavances en diferentes áreas en las cuales da grandes pasos en su comportamiento del concreto frescoy endurecido, dentro de las propiedades más resaltantes en el concreto es el incremento de resistenciaa la compresión y tracción. Adicionalmente se ven mejoras al ser utilizado en morteros y pinturas, lascuales generan un aumento de propiedades de autolimpieza en comparación a los productosconvencionales.Se estima que existan más de 2000 nano-productos que ya estén siendo comercializados, donde muchasaún no han sido evaluadas bajo criterios ambientales, para que no generen efectos negativos al contactocon el agua o el material cementante.En estos años se han ido comercializando de nanomateriales que han generado más impacto como sonlos Nano-TiO2, Nano-Fe2O3, Nano-Sílice, Nanotubos de Carbono, caracterizados porque modifican laspropiedades físicas y químicas del concreto.

Downloads

Não há dados estatísticos.

##plugins.themes.bootstrap3.article.details##

Como Citar
Muñoz Pérez, S., Tuse Vargas, Y., Guerrero Santisteban, K., & Vázquez Pérez, Y. (2021). Uso de Nanomateriales en la Producción del Concreto: Revisión Literaria. Revista De Engenharia E Pesquisa Aplicada, 6(4), 74-87. https://doi.org/10.25286/repa.v6i4.1676
Seção
Engenharia Civil
Biografia do Autor

Socrates Pedro Muñoz Pérez, Universidad Señor de Sipán

Ingeniero Civil egresado de la Universidad Nacional Pedro Ruiz Gallo – Lambayeque en el año 2006, con 11 años de experiencia en ejecución de obras civiles y producción de pre fabricados y pretensados y 8 años de colegiado, con grado de Magister en Ciencias de la Tierra con Mención en Geotecnia egresado de la Universidad Nacional de San Agustín – Arequipa, con un Diplomado en Especialización Geología Aplicada en Minería por en la Cámara Minera del Perú. Mis valores primordiales son la lealtad, responsabilidad, compañerismo, la puntualidad y el deseo de superación. Ex Docente de pre grado en los cursos de Mecánica de Suelos, Mecánica de Fluidos, Geología en las Universidad Catolica San Pablo, Universidad Nestor Caceres Velasquez, Universidad Alas Peruanas, Ex Docente de Post Grado de la Universidad Nestor Caceres Velasquez del curso de Mecanica de Suelos y Rocas, Profesor de la Universidad Señor de Sipán.

Referências

[1] C. Lizarazo y et all., «Nanomateriales: un acercamiento a lo básico,» Medicina y Seguridad del Trabajo, vol. 64, nº 251, pp. 109-118, 2018.
[2] D. de la iglesia y et al., «Nanoinformatics knowledge infrastructures: bringing efficient information management to nanomedical research,» Computational Science & Discovery, vol. 6, nº 1, p. 28, 2013.
[3] J. Benítez, «Nanotecnología: La ciencia al servicio del patrimonio histórico,» MoleQla: Revista de Ciencias de la Universidad Pablo de Olavide, nº 22, pp. 36-38, 2016.
[4] A. Chatterjee, «Nanoparticute matters in cement, concrete & construction - Performance & EHS perspectives,» Indian Concrete Journal, vol. 91, nº 2, pp. 12-24, 2017.
[5] A. Adesina, «Durability Enhancement of Concrete Using Nanomaterials: An Overview,» Materials Science Forum, vol. 967, pp. 221-227, 2019.
[6] C. Ozyildirim y C. Zegetosky, «Exploratory investigation of nanomaterials to improve strength and permeability of concrete,» Transportation Research Record, vol. 2142, nº 1, pp. 1-8, 2010.
[7] M. Mohd y et al., «An Overview on the Performance of Nano Silica Materials on the Properties of Porous Concrete Pavement,» Penerbit Akademia Baru, vol. 1, nº 1, pp. 34-42, 2014.
[8] J. Liu y e. al., «Influence of nanoparticles on fluidity and mechanical properties of cement mortar,» Construction and Building Materials, vol. 101, nº 1, pp. 892-901, 2015.
[9] J. Lee y et al., «Nanomaterials in the Construction Industry: A Review of Their Applications and Environmental Health and Safety Considerations,» ACS Nano, vol. 4, nº 7, pp. 3580-3590, 2010.
[10] M. Mohd y et al., «Utilization of Nano Silica as Cement Paste in Mortar and Porous Concrete Pavement,» Advanced Materials Research, vol. 1113, pp. 135-139, 2015.
[11] A. Dahlan, «Smart and Functional Materials Based Nanomaterials in Construction Styles in NanoArchitecture,» Silicon, vol. 11, pp. 1949-1953, 2019.
[12] Saloma y et al., «Improvement of Concrete Durability by Nanomaterials,» Procedia Engineering, vol. 125, pp. 608-612, 2015.
[13] M. Safiuddin y et al., «State-of-the-art report on use of nano-materials in concrete,» International Journal of Pavement Engineering, vol. 15, nº 10, pp. 37-41, 2014.
[14] P. Brightson y et al., «Strength & durability analysis of nano clay in concrete,» Life Science Journal, vol. 10, nº 7, pp. 1172-1177, 2013.
[15] L. Molina y M. Garzón, «Propiedades de concretos y morteros modificados con nanomateriales: estado del arte,» Arquetipo, vol. 14, pp. 81-98, 2017.
[16] Z. Zhao y et al., «A Review: Application of Nanomaterials in Concrete,» Applied Mechanics and Materials, Vols. 1 de 2405-408, pp. 2881-2884, 2013.
[17] A. Peyvandi y et al., «Evaluation of the Reinforcement Efficiency of Low-Cost Graphite Nanomaterials in HighPerformance Concrete,» KSCE Journal of Civil Engineering, vol. 22, nº 10, pp. 3875-3882, 2018.
[18] M. Suneel y et al., «An Experimental Study on Workability and Strength Characteristics of M40 Grade Concrete by Partial Replacement of Cement with
Nano-TiO2,» Sustainable Construction and Building Materials, vol. 25, pp. 253-263, 2018.
[19] T. Fuente y et al., «Incorporación de nanomateriales en el concreto fotocatalítico para la reducción de NOX y CO2,» Revista de Energía Química y Física, vol. 3, nº 8, pp. 50-56, 2016.
[20] M. Brangança y et al., «The Use of 1% Nano-Fe3O4 and 1% Nano-TiO2 as Partial Replacement of Cement to Enhance the Chemical Performance of Reinforced Concrete Structures,» Athens Journal of Technology and Engineering, vol. 4, nº 2, pp. 97-107, 2017.
[21] A. Shekari y M. Razzaghi, «Influence of Nano Particles on Durability and Mechanical Properties of High Performance Concrete,» Procedia Engineering, vol. 14, pp. 3036-3041, 2011.
[22] M. Kewalramani y Z. Syed, «Application of nanomaterials to enhance microstructure and mechanical properties of concrete,» International Journal of Integrated Engineering, vol. 10, nº 2, pp. 98-104, 2018.
[23] A. Khoshakhlagh y e. al., «Effects of Fe2O3 Nanoparticles on Water Permeability and Strength Assessments of High Strength Self-Compacting Concrete,» Journal of Materials Science & Technology, vol. 28, nº 1, pp. 73-82, 2012.
[24] D. Siang y et al., «Influence of SiO2, TiO2 and Fe2O3 nanoparticles on the properties of fly ash blended cement mortars,» Construction and Building Materials, vol. 258, p. 11, 2020.
[25] M. Zhang y et al., «Durability of concrete with nano-particles under combined action of carbonation and alkali silica reaction,» Building Structures and Materials, vol. 16, nº 5, pp. 421-429, 2019.
[26] W. Gebru y et al., «Individual and Combined Effect of Nano- and Microsilica on Cement-Based Product,» Recent Developments in Sustainable Infrastructure, vol. 75, pp. 427-440, 2020.
[27] M. Ltifi y et al., «Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars Mounir,» Procedia Engineering, vol. 10, pp. 900-905, 2011.
[28] S. Thenmozhi y et al., «Experimental invetigation of the effect of Nano-silica on the mechanical properties of concrete,» IOP Conf. Series: Materials Science and Engineering, vol. 923, p. 7, 2020.
[29] Jonbi y et al., «The long-term effects of nano-silica on concrete,» IOP Conference Series: Materials Science and Engineering, vol. 508, pp. 22-23, 2018.
[30] H. Yang, «Strength and Shrinkage Property of Nano Silica Powder Concrete,» Advances in Intelligent Systems Research, pp. 0794-0797, 2012.
[31] M. Mahdikhani y A. Ramezanianpour, «Mechanical properties and durability of self consolidating cementitious materials incorporating nano silica and silica
fume,» Computers and Concrete, vol. 14, nº 2, pp. 175-191, 2014.
[32] G. Saini y U. Vattipalli, «Assessing properties of alkali activated GGBS based self-compacting geopolymer concrete using nano-silica,» Case Studies in Construction Materials, vol. 12, p. 9, 2020.
[33] L. Singh y et al., «Preparation of Size Controlled Silica Nano Particles and Its Functional Role in Cementitious System,» Journal of Advanced Concrete Technology, vol. 10, nº 11, pp. 345-352, 2012.
[34] M. Rezania y et al., «Experimental study of the simultaneous effect of nano-silica and nano-carbon black on permeability and mechanical properties of the
concrete,» Theoretical and Applied Fracture Mechanics, vol. 104, p. 10, 2019.
[35] S. Lone y et al., «Comparative Study of Nano-Silica Induced Mortar, Concrete and Self-Compacting Concrete – A Review,» Indian Journal of Science and Technology, vol. 9, nº 44, pp. 1-7, 2016.
[36] M. Amin y K. el-hassan, «Effect of using different types of nano materials on mechanical properties of high strength concrete,» Construction and Building Materials, vol. 80, pp. 116-124, 2015.
[37] K. Kumar y et al., «Performance evaluation of nano-silica concrete,» E3S Web of Conferences, vol. 184, nº 01076, pp. 1-6, 2020.
[38] K. Rahmani y et al., «Experimental study of the effect of water to cement ratio on mechanical and durability properties of Nano-silica concretes with Polypropylene fibers,» Scientia Iranica, vol. 26, nº 5, pp. 2712-2722, 2019.
[39] H. Li y Y. Shi, «High-Strength, Waterproof, Corrosion-Resistant NanoSilica Carbon Nanotube Cementitious Composites,» Materials, vol. 13, nº 17, pp. 1-18, 2020.
[40] C. Marcondes y et al., «Nanotubos de carbono en concreto de cemento Portland. Influencia de la dispersión en las propiedades mecánicas y en la absorción de agua,» Revista ALCONPAT, vol. 5, nº 2, pp. 97-114, 2015.
[41] S. Shang y X. Song, «Experimental Research on Mechanicals Performance of Carbon Nanotubes Reinforced Concrete,» Applied Mechanics and Materials, vol.
858, pp. 173-178, 2016.
[42] A. Khitab y et al., «Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes,» Frattura ed Integrita Strutturale, vol. 11, nº 42, pp. 238-248, 2017.
[43] L. Lu y et al., «Mechanical Properties and Durability of Ultra High Strength Concrete Incorporating Multi-Walled Carbon Nanotubes,» Materials, vol. 9, nº 6, pp. 1-11, 2016.
[44] G. Yakovlev y et al., «Modification of Construction Materials with Multi-Walled Carbon Nanotubes,» Procedia Engineering, vol. 57, pp. 407-413, 2013.
[45] B. díaz y et al., «El uso de los nanomateriales en la construcción. Beneficios y riesgos,» conference paper, Madrid - España, 2014.
[46] J. Lee y et al., «Nanomaterials in the Construction Industry: A Review of Their Applications and Environmental Health and Safety Considerations,» ACSNANO,
vol. 4, nº 7, pp. 3580-3590, 2010.
[47] D. Mojica, «La Nanotecnología en la Infraestructura Civil Estado del Conocimiento y Prospectiva,» Universidad Piloto de Colombia, Bogotá - Colombia, 2014.
[48] Euroresidentes, «Euroresidentes,» 2010. [En línea]. Available: https://www.euroresidentes.com/tecnologia/nanotecnologia/nanomaterialesutilizados-en-el-sector. [Último acceso: 27 Octubre 2020].
[49] M. Chileno, «Relación del aditivo nanosilice en la resistencia del concreto en la Urbanización Chorrillos - Ciudad de Huancayo, 2016,» Univeridad Peruana los Andes, Huancayo - Perú, 2017.
[50] S. Hernández y S. Solache, «Applications of Nanocomposites in Architecture and Construction.,» Contexto, vol. 11, nº 14, pp. 63-75, 2017.
[51] Ministerio de Trabajo, Migraciones y Seguridad Social, «Prevención de Riesgos Laborales Frente a la Exposición de Nanopartículas en el Sector de la Construcción,» Fundación Laboral de la Construcción, España, 2017.
[52] G. Tsotsis, «APLICACIONES DE LA NANOTECNOLOGIA EN LOS MATERIALES DE LA CONSTRUCCIÓN,» Universitat Politècnica de Catalunya, Barcelona, 2018.
[53] Instituto Nacional de Seguridad, Salud y Bienestar en el Trabajo (INSSBT), O.A., M.P., «Exposición potencial a nanomateriales en el sector de la construcción,» Instituto Nacional de Seguridad, Salud y Bienestar en el Trabajo (INSSBT), O.A., M.P., Madrd - España, 2017.
[54] A. Hassan y et al., «USE OF CARBON NANOTUBES IN THE RETROFITTING OF REINFORCED CONCRETE BEAMS WITH AN OPENING AND THE EFFECT OF DIRECT FIRE ON THEIR BEHAVIOUR,» International Journal of GEOMATE, vol. 14, nº 44, pp. 149-158, 2018.
[55] L. Cornejo, «Nuevas Tecnologías y Materiales,» 15 Septiembre 2015. [En línea]. Available: https://nuevastecnologiasymateriales.com/aplicaciones-de-la-nanotecnologia-ala-industria-de-la-construccion/. [Último acceso: 27 Octubre 2020].
[56] Ministerio de Trabajo, Migraciones y Seguridad Social - Gobierno de España, «NANOMAT,» FUNDACIÓN ESTATAL PARA LA PREVENCIÓN DE RIESGOS
LABORALES F.S.P., 2017. [En línea]. Available: http://nanomateriales.lineaprevencion.com/nanomateriales. [Último acceso: 27 Octubre 2020].
[57] CIC, «cicconstrucción,» 31 Julio 2015. [En línea]. Available: http://www.cicconstruccion.com/es/notices/2015/07/estudian-la-incorporacionde-nanotubos-de-carbono-a-laconstruccion-de-obra-civil-para-hacerlamas-d-67565.php#.X6dv41rivcf. [Último acceso: 27 Octubre 2020].
[58] I. Mantilla, «Potencial de Uso de la Nanotecnología en la Infraestructura Vial en Colombia,» Universidad de los Andes, Bogotá - Colombia, 2012.
[59] G. Trichês, «La nanotecnología puede minimizar las deformaciones asfálticas,» 7 Marzo 2018. [En línea]. Available: https://www.roadexpertsla.com/es/notic ias/detalhes/la-nanotecnologia-puedeminimizar-las-deformaciones-asfalticas. [Último acceso: 28 Octubre 2020].
[60] M. Hassan y et al., «Transportation Research Record Journal of the Transportation Research Board,» Transportation Research Record, vol. 2207, 2011.
[61] C. Calderón, «PESQUISA JAVERIANA,» 22 Noviembre 2017. [En línea]. Available: https://www.javeriana.edu.co/pesquisa/vias-mas-duraderas-gracias-a-losnanomateriales/. [Último acceso: 28 Octubre 2020].
[62] C. Cortés y et al., «APLICACIÓN DE NANOMATERIALES ACTIVOS EN EL AGLOMERADO ASFÁLTICO PARA LA REDUCCIÓN DE GASES DE COMBUSTIÓN,» de XVI CILA -Congreso Ibero-Latinoamericano del Asfalto, Río de Janeiro - Brasil, 2011.
[63] O. Ramírez, «MODIFICACIÓN DE LA RESISTENCIA DE UNA ARCILLA PLÁSTICA CON NANO-SÍLICE,» UNIVERSIDAD NACIONAL AUTÓNOMA DE MÉXICO, México, 2017.
[64] C. Castillo, «MODIFICACIÓN DE LAS PROPIEDADES DE MATRICES CEMENTANTES MEDIANTE LA ADICIÓN DE NANOPARTÍCULAS DE SÍLICE,» Universidad Autónoma de Nuevo León, Mexico, 2015.
[65] L. Carcamo, «REVISIÓN, ANÁLISIS Y APLICACIÓN DE LA NANOTECNOLOGÍA EN LA GENERACIÓN Y MEJORA DE MATERIALES CONSTRUCTIVOS. ESTUDIO DE MORTEROS DE CEMENTO CON ADICIONES DE NANOSÍLICE.,» Universidad Austral de Chile, Valdivia, 2006.
[66] ORP Fundación Internacional, «ORP Fundación Internacional,» 25 Febrero 2019. [En línea]. Available: https://www.fiorp.org/losnanomateriales-en-el-sector-de-laconstruccion/. [Último acceso: 28 Octubre 2020].
[67] J. Dávila y et al., «NUEVOS MATERIALES: APLICACIONES ESTRUCTURALES E INDUSTRIALES,» IMPREFEPP, 2011.
[68] A. Galera, «Prevención Integral,» 19 Marzo 2014. [En línea]. Available: https://www.prevencionintegral.com/comunidad/blog/decentnanowork/2017/02/21/riesgo-nano-enconstruccion-distintos-oficios-distintasnanoparticulas. [Último acceso: 27 Octubre 2020].
[69] Arcus Global, « Arcus Global,» 7 Noviembre 2020. [En línea]. Available: https://www.arcusglobal.com/wp/nanotecnologia-en-laconstruccion/. [Último acceso: 28 Octubre 2020].
[70] D. Duarte, «Efecto de la adición de nanosílice en cementos y concretos,» UNIVERSIDAD SIMÓN BOLÍVAR DEPARTAMENTO DE CIENCIAS DE LOS MATERIALES CEMENTOS CONCRETOS Y ASFALTOS PARA OBRAS CIVILES, pp. 1- 15, 2013.
[71] S. Arrechea y E. Guerrero, «Revista Construcción,» 20 Mayo 2020. [En línea]. Available: http://revistaconstruccion.gt/sitio/2020/05/20/innovaciones-nanotecnologicaspara-la-industria-de-la-construccion/. [Último acceso: 27 Octubre 2020].
[72] S. Hernández y S. Solache, «Applications of Nanocomposites in Architecture and Construction,» Revista de la Facultad de Arquitectura y Construcción, vol. 11, nº 14, 2017.
[73] Inarquia, «Inarquia,» 1 Noviembre 2017. [En línea]. Available: https://inarquia.es/nanotecnologiaaplicada-arquitectura-urbanismo. [Último acceso: 27 Octubre 2020].
[74] J. Alcaraz, «Microestructura del hormigón con adición de nano sílice,» UNIVERSIDAD POLITÉCNICA DE CARTAGENA, CARTAGENA, 2015.
[75] M. Mohd y et al., «A Review of Microstructure Properties of Porous Concrete Pavement Incorporating NanoSilica,» Journal of Engineering and Applied Sciences, vol. 11, nº 20, pp. 11832-11835, 2016.
[76] M. Llobregat y et al., «DESQBRE FUNDACIÓN,» 24 Junio 2015. [En línea]. Available: https://fundaciondescubre.es/noticias/nanomateriales-para-rejuveneceredificios-historicos-deteriorados/. [Último acceso: 19 Octubre 2020].
[77] E. Navarro y H. Forero, «Mejoramiento de la resistencia a compresión del concreto con Nanotubos de Carbono,» Universidad Distrital Francisco José de
Caldas, Bogotá - Colombia, 2017.
[78] Instituto Mexicano del Cemento y del Concreto, A.C., «Construcción y Tecnología en Concreto,» Revista CYT, vol. 6, nº 2, pp. 1-60, 26.
[79] S. Mat y et al., «The Effects of TiO2 in the Performance of Mortar,» Applied Mechanics and Materials, Vols. %1 de %2773-774, pp. 1027-1031, 2015.